|
|
|
National Stock Number:
5310-01-142-4877
Federal Supply Class:
5310
National Item Identification Number:
011424877
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 7183.102 | N0002 | ALCATEL-LUCENT NORWAY AS | | C0ML 17X30MM | 1FH08 | LEHIGH ARMSTRONG INC | | C0ML 4.3X9MM | 1FH08 | LEHIGH ARMSTRONG INC | | C0ML 8.4X17MM | 1FH08 | LEHIGH ARMSTRONG INC | | C0ML 17X30MM | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | C0ML 4.3X9MM | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | DIN125-BRASS | 1FH08 | LEHIGH ARMSTRONG INC | | DIN125B BRASS | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | C0ML 8.4X17MM | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | DIN125 17X30 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | DIN125 4.3X9 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | DIN125 8.4X17 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 17.0 MILLIMETERS NOMINAL | | OVERALL DIAMETER | 30.0 MILLIMETERS NOMINAL | | MATERIAL | COPPER ALLOY OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 3.0 MILLIMETERS NOMINAL |
|