| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 21.95 MILLIMETERS MINIMUM AND 22.05 MILLIMETERS MAXIMUM |
| COUNTERBORE DIAMETER | 6.0 MILLIMETERS MINIMUM NUT |
| DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 10.9 MILLIMETERS MINIMUM AND 11.1 MILLIMETERS MAXIMUM |
| FEATURES PROVIDED | FLOATING NUT |
| HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND 44.0 ROCKWELL C MAXIMUM |
| LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| LUBRICATION | DRY FILM LUBRICANT |
| OVERALL HEIGHT | 16.2 MILLIMETERS NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE NUT |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS3304 ASSN STD SINGLE MATERIAL RESPONSE SEAL |
| MATERIAL | RUBBER SYNTHETIC SEAL |
| MATERIAL | STEEL COMP 1050 NUT |
| MATERIAL | STEEL SHELL |
| MATERIAL | STEEL WASHER |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| MOUNTING HOLE DIAMETER | 2.5 MILLIMETERS MINIMUM AND 2.7 MILLIMETERS MAXIMUM |
| NOMINAL THREAD SIZE | 5.0 MILLIMETERS |
| NUT HEIGHT | 8.0 MILLIMETERS NOMINAL |
| NUT LENGTH | 24.6 MILLIMETERS NOMINAL |
| NUT MOUNTING PROVISION | STRAIGHT HOLES |
| NUT STYLE | PLATE |
| PLATE THICKNESS | 1.10 MILLIMETERS NOMINAL |
| PLATE WIDTH | 14.4 MILLIMETERS NOMINAL |
| SPECIAL FEATURES | SEAL HARDNESS SHORE A55-65 |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-N-25027 MIL SPEC SINGLE TREATMENT RESPONSE NUT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE SHELL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE WASHER |
| SURFACE TREATMENT | CADMIUM NUT |
| SURFACE TREATMENT | CADMIUM SHELL |
| SURFACE TREATMENT | CADMIUM WASHER |
| TEMP RATING | -55.0 CELSIUS MINIMUM AND 230.0 CELSIUS MAXIMUM |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES | ISO M |
| THREAD PITCH IN MILLIMETERS | 0.80 |
| THREAD TOLERANCE CLASS | 4H5H INTERNAL |