|
|
|
National Stock Number:
5310-01-144-6284
Federal Supply Class:
5310
National Item Identification Number:
011446284
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| BACN10JJ29 | 77272 | THE BOEING COMPANY | | BACN10JJ29 | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| THREAD SERIES | UNS | | NOMINAL THREAD SIZE | 3.340 INCHES | | THREAD QUANTITY PER INCH | 16 | | THREAD PITCH DIAMETERS | 3.2994 TO 3.3050 INCHES | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | STEEL COMP 4130 OR | | STEEL COMP 4340 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-T-6736 MIL SPEC 1ST MATERIAL RESPONSE OR | | MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR | | AMS 6415 ASSN STD 2ND MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PHOSPHATE ZINC OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | DOD-P-16232,TY Z,CL 4 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND | | 36.0 ROCKWELL C MAXIMUM | | SMALL END DIAMETER | 3.890 INCHES MINIMUM AND | | 3.910 INCHES MAXIMUM | | DRIVE POINT DEPTH | 0.181 INCHES NOMINAL | | NUT DIAMETER | 4.293 INCHES MINIMUM AND | | 4.313 INCHES MAXIMUM | | NUT THICKNESS | 0.563 INCHES MINIMUM AND | | 0.583 INCHES MAXIMUM | | DRIVE POINT WIDTH | 0.180 INCHES MINIMUM AND | | 0.200 INCHES MAXIMUM | | DRIVE POINT QUANTITY | 33 | | NUT COUNTERBORE DEPTH | 0.193 INCHES MINIMUM AND | | 0.208 INCHES MAXIMUM NUT | | COUNTERBORE DIAMETER | 4.053 INCHES MINIMUM AND | | 4.073 INCHES MAXIMUM NUT | | COUNTERSINK ANGLE | 118.0 DEGREES MINIMUM AND | | 122.0 DEGREES MAXIMUM BOTH ENDS | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
|
|