5310-01-145-4564, WASHER,LOCK

National Stock Number:
5310-01-145-4564

Federal Supply Class:
5310

National Item Identification Number:
011454564

Description:
WASHER,LOCK

Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces

Manufacturer Information:

21C116-06	06602	NEXTIRAONE SOLUTIONS LLC
5310011454564	A00AM	E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE
MS35333-154	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
FF-W-100	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
5310PL2178687	9009H	INSPEKTORAT WSPARCIA SIL ZBROJNYCH
MS35333-154	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
NASM35333	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE

Techincal Specification:

HARDNESS RATING	35.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM
HOLE DIAMETER	0.141 INCHES MINIMUM AND 0.150 INCHES MAXIMUM
OUTSIDE DIAMETER	0.275 INCHES MINIMUM AND 0.295 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD ALL MATERIAL RESPONSES OVERALL
MATERIAL THICKNESS	0.017 INCHES MINIMUM AND 0.021 INCHES MAXIMUM
MATERIAL	STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 OR STEEL COMP 303SE OVERALL
NONDEFINITIVE SPEC/STD DATA	1 TYPE AND A GRADE AND 1 STYLE
STYLE DESIGNATOR	FLAT INTERNAL TEETH
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35,TY 2 OR TY 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL

Click here to Register for Free 30-day Trial