|
|
|
National Stock Number:
5310-01-145-8407
Federal Supply Class:
5310
National Item Identification Number:
011458407
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| B4024745 | 56996 | DEPARTMENT OF THE ARMY HQ UNITED STATES ARMY COMMUNICATIONS RESEARCH AND DEVELOPMENT COMMAND |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.125 INCHES NOMINAL | | OVERALL DIAMETER | 0.275 INCHES NOMINAL | | MATERIAL | STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 303PB OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304H OR STEEL COMP 304L OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.019 INCHES NOMINAL |
|
|