|
|
|
National Stock Number:
5310-01-147-4052
Federal Supply Class:
5310
National Item Identification Number:
011474052
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 11609642 | 7X677 | GENERAL MOTORS LLC | | 2436168 | 23862 | MILITARY VEHICLES OPN GENERAL MOTORS TRUCK AND BUS GROUP MS 2603-02 | | 456720129009 | 0000V | NCB HUNGARY HONVEDSEGI EGYSEGES TERMEKKOD | | 2436168 | 34623 | AM GENERAL LLC | | 2436168 | 7X677 | GENERAL MOTORS LLC | | 5310PL0773271 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | AEW26X75N010BD6A81 | 05047 | THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS | | AEW26X75N010BD6A81 | 34623 | AM GENERAL LLC | | G2436168 | 34623 | AM GENERAL LLC | | 5593312 | 34623 | AM GENERAL LLC | | AEW26X75N000BD6A11 | 7X677 | GENERAL MOTORS LLC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | FEATURES PROVIDED | CASEHARDENED | | HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 0.812 INCHES NOMINAL | | MATERIAL | STEEL OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL DIAMETER | 1.365 INCHES MINIMUM AND 1.385 INCHES MAXIMUM | | SURFACE TREATMENT | ZINC OVERALL AND DICHROMATE OVERALL | | THICKNESS | 0.104 INCHES NOMINAL |
|
|