|
|
|
National Stock Number:
5310-01-150-5919
Federal Supply Class:
5310
National Item Identification Number:
011505919
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 5310PL0751055 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 8623744 | 11862 | GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT | | 8623744 | 7X677 | GENERAL MOTORS LLC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HEAT TREATMENT | FULL HARD | | HOLE DIAMETER | 0.313 INCHES MINIMUM AND 0.318 INCHES MAXIMUM | | OVERALL DIAMETER | 0.700 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD ALL MATERIAL RESPONSES OVERALL | | MATERIAL | STEEL COMP 1010 OR STEEL COMP 1213 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT | CADMIUM OVERALL | | THICKNESS | 0.0513 INCHES MINIMUM AND 0.0563 INCHES MAXIMUM |
|
|