|
|
|
National Stock Number:
5310-01-164-2345
Federal Supply Class:
5310
National Item Identification Number:
011642345
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| LD153-0027-1009 | 43999 | THE BOEING COMPANY |
|
Techincal Specification:
| MATERIAL | STEEL COMP XM-13 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND | | 45.0 ROCKWELL C MAXIMUM | | STYLE DESIGNATOR | RECESSED | | HOLE DIAMETER | 0.564 INCHES MINIMUM AND | | 0.568 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.938 INCHES MINIMUM AND | | 0.958 INCHES MAXIMUM | | RECESS DIAMETER | 0.684 INCHES MINIMUM AND | | 0.694 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.081 INCHES MINIMUM AND | | 0.095 INCHES MAXIMUM | | RECESS ANGLE | 90.0 DEGREES NOMINAL |
|
|