|
|
|
National Stock Number:
5310-01-172-2054
Federal Supply Class:
5310
National Item Identification Number:
011722054
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 75A427230-2001 | K0289 | BRITISH AEROSPACE MILITARY AIRCRAFT & AEROSTRUCTURES | | 75A427230-2001 | K1987 | BAE SYSTEMS PLC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.266 INCHES NOMINAL | | OVERALL DIAMETER | 0.560 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | BS 1490.L-25M NATIONAL SPEC SINGLE MATERIAL RESPONSE OR BS 1490.S07-1008 10G NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | ALUMINUM ALLOY OVERALL | | PERIPHERAL SHAPE STYLE | DEE | | SPECIAL FEATURES | OFF CENTER ID. RADIUS 0.360 IN. CENTERLINE TO OUTSIDE EDGE |
|
|