|
|
|
National Stock Number:
5310-01-173-0345
Federal Supply Class:
5310
National Item Identification Number:
011730345
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 12621809 | 19200 | US ARMY ARDEC RDECOM |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.505 INCHES MINIMUM AND 0.525 INCHES MAXIMUM | | OVERALL DIAMETER | 0.940 INCHES MINIMUM AND 0.960 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A108 ASSN STD ALL MATERIAL RESPONSES OVERALL | | MATERIAL | STEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1020 OR STEEL COMP 1022 OR STEEL COMP 1025 OR STEEL COMP 1030 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,CLASS 3,TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THICKNESS | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
|
|