|
|
|
National Stock Number:
5310-01-173-9549
Federal Supply Class:
5310
National Item Identification Number:
011739549
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 350402 | 07524 | DOVER PUMPS & PROCESS SOLUTIONS SEGMENT INC | | E-3964REVL PIECE 29 | 07524 | DOVER PUMPS & PROCESS SOLUTIONS SEGMENT INC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-576 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | COPPER ALLOY 110 OR COPPER ALLOY 113 OR COPPER ALLOY 114 OR COPPER ALLOY 116 OR COPPER ALLOY 120 OR COPPER ALLOY 121 OR COPPER ALLOY 122 OR COPPER ALLOY 123 OR COPPER ALLOY 125 OR COPPER ALLOY 127 OR COPPER ALLOY 128 OR COPPER ALLOY 130 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND |
|
|