|
|
|
National Stock Number:
5310-01-174-0546
Federal Supply Class:
5310
National Item Identification Number:
011740546
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 298D184 PIECE 7 | 90099 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 521C096 PIECE 1 | 055V5 | NORTHROP GRUMMAN SYSTEMS CORP ELECTRONIC SENSORS AND SYSTEMS DIV | | 521C096 PIECE 1 | 90099 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| DRIVE POINT QUANTITY | 4 | | DRIVE POINT WIDTH | 0.500 NOMINAL INCHES | | COUNTERSINK ANGLE | 90.0 DEGREES NOMINAL NUT | | HOLE CONFIGURATION STYLE | CONFIGURATION F | | HOLE NOMINAL THREAD DIAMETER | 0.312 INCHES | | HOLE THREAD QUANTITY PER INCH | 18 | | HOLE TYPE AND QUANTITY | 1 TAPPED | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-890,ALLOY 2 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | PROPRIETARY CHARACTERISTICS | PACS | | NOMINAL THREAD SIZE | 5.875 INCHES | | NUT DIAMETER | 7.500 INCHES NOMINAL | | NUT STYLE | ROUND | | NUT THICKNESS | 1.125 INCHES NOMINAL | | SPECIAL FEATURES | THREAD CBORE 0.344 IN. DIAMETER BY 0.312 IN. DEEP | | THREAD CLASS | 3B | | THREAD DIRECTION | LEFT-HAND | | THREAD QUANTITY PER INCH | 12 | | THREAD SERIES | UN | | DRIVE POINT DEPTH | 0.250 INCHES NOMINAL |
|
|