| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.217 INCHES MINIMUM AND 0.221 INCHES MAXIMUM |
| COUNTERBORE DIAMETER | 0.254 INCHES MINIMUM NUT |
| DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM |
| LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5525 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | IRON ALLOY 660 OVERALL |
| MOUNTING HOLE DIAMETER | 0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| MOUNTING HOLE COUNTERSINK ANGLE | 98.0 DEGREES MINIMUM AND 100.0 DEGREES MAXIMUM |
| MOUNTING PROVISION LOCATION | OPPOSITE NUT PROJECTION SIDE |
| NOMINAL THREAD SIZE | 0.250 INCHES |
| NUT COUNTERBORE DEPTH | 0.062 INCHES MINIMUM NUT |
| NUT HEIGHT | 0.281 INCHES MAXIMUM |
| NUT MOUNTING PROVISION | COUNTERSUNK HOLES OR DIMPLED HOLES |
| NUT STYLE | PLATE |
| NUT LENGTH | 0.822 INCHES MAXIMUM |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
| PLATE THICKNESS | 0.055 INCHES MAXIMUM |
| PLATE WIDTH | 0.380 INCHES MINIMUM AND 0.414 INCHES MAXIMUM |
| PRECIOUS MATERIAL AND LOCATION | OVERALL SILVER |
| PRECIOUS MATERIAL | SILVER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2410 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | SILVER OVERALL |
| TEMP RATING | 800.0 FAHRENHEIT MAXIMUM |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD CLASS | 3B |
| THREAD SERIES | UNJF |
| THREAD QUANTITY PER INCH | 28 |