|
|
|
National Stock Number:
5310-01-174-8978
Federal Supply Class:
5310
National Item Identification Number:
011748978
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 9524M23P01 | 07482 | GENERAL ELECTRIC COMPANY | | 9524M23P01 | 65445 | TSI PLASTICS, INC. |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CRITICALITY CODE JUSTIFICATION | FEAT | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.585 INCHES MINIMUM AND 0.595 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | 4203 SERIES,GEN.ELEC. ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | OVERALL DIAMETER | 0.780 INCHES MINIMUM AND 0.810 INCHES MAXIMUM | | MATERIAL | PLASTIC POLYAMIDE (NYLON) OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SPECIAL FEATURES | THIS IS A CRITICAL APPLICATION ITEM | | THICKNESS | 0.0385 INCHES MINIMUM AND 0.0415 INCHES MAXIMUM |
|
|