|
|
|
National Stock Number:
5310-01-175-6972
Federal Supply Class:
5310
National Item Identification Number:
011756972
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| G122882-1 | 3B150 | RAYTHEON COMPANY | | G122882-1 | 49956 | RAYTHEON COMPANY |
|
Techincal Specification:
| HOLE DIAMETER | 0.263 INCHES MINIMUM AND 0.265 INCHES MAXIMUM | | OUTSIDE DIAMETER | 1.125 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.063 INCHES NOMINAL | | MATERIAL | STEEL COMP 304 OVERALL | | RECESS ANGLE | 82.0 DEGREES NOMINAL | | RECESS DIAMETER | 0.320 INCHES MINIMUM AND 0.350 INCHES MAXIMUM | | STYLE DESIGNATOR | RECESSED | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL |
|
|