|
|
|
National Stock Number:
5310-01-175-7610
Federal Supply Class:
5310
National Item Identification Number:
011757610
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 35253 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | 35253 | K0377 | GOODRICH ACTUATION SYSTEMS LIMITED | | 35253 | K0659 | CLAVERHAM LTD |
|
Techincal Specification:
| HOLE DIAMETER | 0.250 INCHES MINIMUM AND 0.255 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.070 INCHES NOMINAL | | III PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | PROPRIETARY CHARACTERISTICS | PACS | | RECESS ANGLE | 90.0 DEGREES NOMINAL | | STYLE DESIGNATOR | RECESSED |
|
|