|
|
|
National Stock Number:
5310-01-176-8412
Federal Supply Class:
5310
National Item Identification Number:
011768412
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 1959M37G01 | 07482 | GENERAL ELECTRIC COMPANY | | 7038M75P01 | 07482 | GENERAL ELECTRIC COMPANY | | NE-40002 | 24664 | JONAL LABORATORIES INC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.254 INCHES MINIMUM AND 0.272 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5516 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL DIAMETER | 0.740 INCHES MINIMUM AND 0.750 INCHES MAXIMUM | | SPECIAL FEATURES | WASHER MOLDED IN RUBBER TO FORM AN ASSEMBLY;RUBBER:A50TF156 CL-A(FLUOROCARBON RUBBER SEALING DEVICE) | | THICKNESS | 0.168 INCHES MINIMUM AND 0.178 INCHES MAXIMUM |
|
|