|
|
|
National Stock Number:
5310-01-178-3981
Federal Supply Class:
5310
National Item Identification Number:
011783981
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 16610336-001 | 28009 | SYPRIS ELECTRONICS, LLC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HARDNESS RATING | 70.0 SHORE DUROMETER A NOMINAL | | HOLE DIAMETER | 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM | | OVERALL DIAMETER | 0.845 INCHES MINIMUM AND 0.905 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | ZZ-R-765,CLASS 2A,GRADE 70 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | RUBBER OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SPECIAL FEATURES | MATL RUBBER SILICONE CLASS SI ANDSNUBBER GROOVE 0.031 IN. RADIUS | | THICKNESS | 0.203 INCHES MINIMUM AND 0.219 INCHES MAXIMUM |
|
|