|
|
|
National Stock Number:
5310-01-180-8707
Federal Supply Class:
5310
National Item Identification Number:
011808707
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 27218264 | 80234 | VAPOR CORP SUB OF BRUNSWICK CORP |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-5059 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-5059 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-5059 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR AMS 5510 ASSN STD 5TH MATERIAL RESPONSE OVERALL OR AMS 5512 ASSN STD 6TH MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 301 OVERALL OR STEEL COMP 302 OVERALL OR STEEL COMP 304 OVERALL OR STEEL COMP 316 OVERALL OR STEEL COMP 321 OVERALL OR STEEL COMP 347 OVERALL | | PERIPHERAL SHAPE STYLE | DEE | | PROPRIETARY CHARACTERISTICS | PACS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL |
|
|