|
|
|
National Stock Number:
5310-01-182-9632
Federal Supply Class:
5310
National Item Identification Number:
011829632
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 69456A19 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5513 ASSN STD 1ST MATERIAL RESPONSE AND | | AMS5515 ASSN STD 2ND MATERIAL RESPONSE OR | | MIL-S-7730 COMP.303,COND A MIL SPEC 3RD MATERIAL RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.295 INCHES MINIMUM AND | | 0.302 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.500 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.027 INCHES MINIMUM AND | | 0.036 INCHES MAXIMUM | | INSIDE LEFT CORNER CHAMFER ANGLE | 90.0 DEGREES NOMINAL | | INSIDE RIGHT CORNER CHAMFER ANGLE | 90.0 DEGREES NOMINAL | | HARDNESS RATING | 65.0 ROCKWELL B MINIMUM AND | | 105.0 ROCKWELL B MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 73030 | | DESIGN CONTROL REFERENCE | 69456A19 |
|
|