|
|
|
National Stock Number:
5310-01-189-3812
Federal Supply Class:
5310
National Item Identification Number:
011893812
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10110106 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 4M36-02069 | 76301 | THE BOEING COMPANY | | 4M36-02135 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| MATERIAL | ALUMINUM ALLOY 2024 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5,T3 OR T4 FED SPEC SINGLE MATERIAL RESPONSE OR | | QQ-A-250/4,T3 OR T4 FED SPEC SINGLE MATERIAL RESPONSE OR | | QQ-A-225/6,T4 FED SPEC SINGLE MATERIAL RESPONSE OR | | WW-T-785,T3 TYPE 1 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY 1 OR TY 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.256 INCHES MINIMUM AND | | 0.276 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.740 INCHES MINIMUM AND | | 0.760 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.125 INCHES NOMINAL |
|
|