|
|
|
National Stock Number:
5310-01-190-7570
Federal Supply Class:
5310
National Item Identification Number:
011907570
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| BACW10AW5S | 81205 | THE BOEING COMPANY | | BACW10AW5S | 82918 | THE BOEING COMPANY |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1008 OR | | STEEL COMP 1009 OR | | STEEL COMP 1015 OR | | STEEL COMP 1018 OR | | STEEL COMP 1020 OR | | STEEL COMP 1025 OR | | STEEL COMP 1010 OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.333 INCHES MINIMUM AND | | 0.343 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.583 INCHES MINIMUM AND | | 0.603 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.028 INCHES MINIMUM AND | | 0.036 INCHES MAXIMUM |
|
|