|
|
|
National Stock Number:
5310-01-191-5306
Federal Supply Class:
5310
National Item Identification Number:
011915306
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 951B922 | 0CAM5 | HAMILTON SUNDSTRAND CORPORATION | | 951B922-1 | 83843 | SUNDSTRAND CORP ELECTRIC POWER SYSTEMS DIV | | 951B92323 | 56878 | SPS TECHNOLOGIES, LLC | | 951B922-1 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | SURFACE TREATMENT | OXIDE OVERALL | | HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND | | 43.0 ROCKWELL C MAXIMUM | | STYLE DESIGNATOR | RECESSED | | HOLE DIAMETER | 0.193 INCHES NOMINAL | | OUTSIDE DIAMETER | 0.365 INCHES NOMINAL | | RECESS DIAMETER | 0.285 INCHES NOMINAL | | MATERIAL THICKNESS | 0.063 INCHES NOMINAL | | RECESS ANGLE | 45.0 DEGREES NOMINAL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 0CAM5 | | DESIGN CONTROL REFERENCE | 951B922 |
|
|