|
|
|
National Stock Number:
5310-01-192-9310
Federal Supply Class:
5310
National Item Identification Number:
011929310
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 242445 | 09205 | LOCKHEED MARTIN CORP ELECTRONICS AND MISSILES DIV |
|
Techincal Specification:
| COUNTERBORE DIAMETER | 0.3755 INCHES MINIMUM FLANGE AND 0.3757 INCHES MAXIMUM FLANGE | | CROSS-SECTIONAL SHAPE | ROUND W/WRENCH FLATS FLANGE | | CROSS-SECTIONAL SHAPE | ROUND NUT | | FLANGE DIAMETER | 0.595 INCHES MINIMUM AND 0.605 INCHES MAXIMUM | | FLANGE THICKNESS | 0.036 INCHES MINIMUM AND 0.048 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 303 OVERALL | | PROPRIETARY CHARACTERISTICS | PACS | | NOMINAL THREAD SIZE | 0.375 INCHES | | NUT COUNTERBORE DEPTH | 0.123 INCHES NOMINAL FLANGE | | NUT DIAMETER | 0.4999 INCHES MINIMUM AND 0.5001 INCHES MAXIMUM | | NUT LENGTH | 0.192 INCHES MINIMUM AND 0.194 INCHES MAXIMUM | | NUT STYLE | SLEEVE | | SPECIAL FEATURES | TWO WRENCHING FLATS 0.554 IN. MIN AND 0.562 IN. MAX WIDTH ACROSS FLATS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TY 4 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 24 | | THREAD SERIES | UNF |
|
|