|
|
|
National Stock Number:
5310-01-195-5086
Federal Supply Class:
5310
National Item Identification Number:
011955086
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 20152-1050 | 78062 | SARGENT AEROSPACE & DEFENSE, LLC | | 20172-001 FIND NO. 19 | 78062 | SARGENT AEROSPACE & DEFENSE, LLC |
|
Techincal Specification:
| CROSS-SECTIONAL SHAPE | ROUND NUT | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/8,T6510 OR T6511 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-225/8,T651 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/11,T651 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | ALUMINUM ALLOY 6061 OVERALL | | PROPRIETARY CHARACTERISTICS | PACS | | NOMINAL THREAD SIZE | 0.190 INCHES | | NUT DIAMETER | 0.419 INCHES MINIMUM AND 0.420 INCHES MAXIMUM | | NUT LENGTH | 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM | | NUT STYLE | SLEEVE | | SPECIAL FEATURES | 1 GROOVE 0.093 IN. WIDE,0.055 IN. DEEP IN THE CENTER OF THE NUT CIRCUMFERENCE,90 DEG COUNTERSINK THREADED END | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SPS 05-000003,TYPE 1,CLASS FSCM 78062 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.220 INCHES NOMINAL | | THREAD QUANTITY PER INCH | 32 | | THREAD SERIES | UNF |
|
|