|
|
|
National Stock Number:
5310-01-197-2576
Federal Supply Class:
5310
National Item Identification Number:
011972576
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 13205E4956 | 97403 | CECOM LR CENTER |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.516 INCHES MINIMUM AND 0.546 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE J403 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OVERALL | | PERIPHERAL SHAPE STYLE | SQUARE | | WIDTH ACROSS FLATS | 5.000 INCHES NOMINAL | | SURFACE TREATMENT | PAINT OVERALL | | THICKNESS | 0.110 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
|
|