|
|
|
National Stock Number:
5310-01-197-7569
Federal Supply Class:
5310
National Item Identification Number:
011977569
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 100168-354 | 79318 | MEGGITT NORTH HOLLYWOOD INC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.126 INCHES MINIMUM AND 0.131 INCHES MAXIMUM | | MATERIAL | STEEL COMP 301 OVERALL OR STEEL COMP 302 OVERALL OR STEEL COMP 304 OVERALL OR STEEL COMP 316 OVERALL OR STEEL COMP 301 OVERALL OR STEEL COMP 304L OVERALL OR STEEL COMP 316L OVERALL OR STEEL COMP 321 OVERALL OR STEEL COMP 347 OVERALL OR STEEL COMP 309 OVERALL OR STEEL COMP 310 OVERALL OR STEEL COMP 305 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL DIAMETER | 0.355 INCHES MINIMUM AND 0.365 INCHES MAXIMUM | | THICKNESS | 0.015 INCHES MINIMUM AND 0.017 INCHES MAXIMUM |
|
|