5310-01-207-7575, WASHER,FLAT

National Stock Number:
5310-01-207-7575

Federal Supply Class:
5310

National Item Identification Number:
012077575

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

707997

99167

HAMILTON SUNDSTRAND CORPORATION

Techincal Specification:

CENTER HOLE SHAPE STYLE	ROUND
CROSS-SECTIONAL SHAPE STYLE	BLANK RECTANGULAR
HOLE DIAMETER	0.276 INCHES MINIMUM AND 0.296 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 4082 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS 4117 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	ALUMINUM ALLOY 6061 OVERALL
PERIPHERAL SHAPE STYLE	ROUND
PROPRIETARY CHARACTERISTICS	PACS
OUTSIDE LEFT CORNER CHAMFER ANGLE	40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM
OVERALL DIAMETER	1.360 INCHES MINIMUM AND 1.365 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	ANODIZE OVERALL
THICKNESS	0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM

Click here to Register for Free 30-day Trial