| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 1.123 INCHES MINIMUM AND 1.127 INCHES MAXIMUM |
| COUNTERBORE DIAMETER | 0.415 INCHES MINIMUM NUT |
| DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.557 INCHES MINIMUM AND 0.567 INCHES MAXIMUM |
| FEATURES PROVIDED | FLOATING NUT |
| LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| LUBRICATION | DRY FILM LUBRICANT |
| OVERALL HEIGHT | 1.015 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-R-25988 MIL SPEC SINGLE MATERIAL RESPONSE SEAL |
| MATERIAL | RUBBER FLUOROSILICONE CLASS FQ SEAL |
| MATERIAL | STEEL COMP 1213 WASHER |
| MATERIAL | STEEL NUT |
| MATERIAL | STEEL SHELL |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| MOUNTING HOLE DIAMETER | 0.130 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| NOMINAL THREAD SIZE | 0.375 INCHES |
| NUT COUNTERBORE DEPTH | 0.120 INCHES MINIMUM NUT |
| NUT HEIGHT | 0.522 INCHES MAXIMUM |
| NUT LENGTH | 1.421 INCHES MAXIMUM |
| NUT MOUNTING PROVISION | STRAIGHT HOLES |
| NUT STYLE | PLATE |
| PLATE WIDTH | 0.893 INCHES MAXIMUM |
| PLATE THICKNESS | 0.030 INCHES MAXIMUM |
| SPECIAL FEATURES | DRY FILM LUBRICANT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE II,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE WASHER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE III,CLASS 2 FED SPEC 1ST TREATMENT RESPONSE AND QQ-P-416,TYPE III,CLASS 2 FED SPEC 2ND TREATMENT RESPONSE AND MIL-L-8937 MIL SPEC 3RD TREATMENT RESPONSE NUT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE III,CLASS 2 FED SPEC 1ST TREATMENT RESPONSE AND QQ-P-416,TYPE III,CLASS 2 FED SPEC 2ND TREATMENT RESPONSE AND MIL-L-8937 MIL SPEC 3RD TREATMENT RESPONSE SHELL |
| SURFACE TREATMENT | CHROMATE AND PHOSPHATE SHELL |
| TEMP RATING | -80.0 FAHRENHEIT MINIMUM AND 375.0 FAHRENHEIT MAXIMUM |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES | UNJF |
| THREAD QUANTITY PER INCH | 24 |