|
|
|
National Stock Number:
5310-01-215-3799
Federal Supply Class:
5310
National Item Identification Number:
012153799
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| NF 203247-1 | 78567 | SPECO CORP |
|
Techincal Specification:
| THREAD SERIES | UNS | | NOMINAL THREAD SIZE | 0.586 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD PITCH DIAMETERS | 0.5657 TO 0.5687 INCHES | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | STEEL COMP 1015 OR | | STEEL COMP 1016 OR | | STEEL COMP 1017 OR | | STEEL COMP 1018 OR | | STEEL COMP 1019 OR | | STEEL COMP 1020 OR | | STEEL COMP 1021 OR | | STEEL COMP 1022 OR | | STEEL COMP 1023 OR | | STEEL COMP 1524 OR | | STEEL COMP 1025 OR | | STEEL COMP 1527 OR | | STEEL COMP 1029 OR | | STEEL COMP 1030 OR | | STEEL COMP 1031 OR | | STEEL COMP 1033 OR | | STEEL COMP 1034 OR | | STEEL COMP 1035 OR | | STEEL COMP 1212 OR | | STEEL COMP 1213 OR | | STEEL COMP 1115 OR | | STEEL COMP 1116 OR | | STEEL COMP 1117 OR | | STEEL COMP 1118 OR | | STEEL COMP 1215 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 24.0 ROCKWELL C MINIMUM | | NUT STYLE | ROUND | | DRIVE POINT DEPTH | 0.060 INCHES MINIMUM AND | | 0.080 INCHES MAXIMUM | | NUT DIAMETER | 0.997 INCHES MINIMUM AND | | 1.000 INCHES MAXIMUM | | NUT THICKNESS | 0.300 INCHES MINIMUM AND | | 0.310 INCHES MAXIMUM | | DRIVE POINT WIDTH | 0.100 INCHES MINIMUM AND | | 0.120 INCHES MAXIMUM | | DRIVE POINT QUANTITY | 4 | | NUT COUNTERBORE DEPTH | 0.060 INCHES NOMINAL BOSS | | COUNTERBORE DIAMETER | 0.610 INCHES MINIMUM AND | | 0.614 INCHES MAXIMUM SECOND END | | 0.590 INCHES MINIMUM AND | | 0.596 INCHES MAXIMUM BOSS |
|
|