|
|
|
National Stock Number:
5310-01-223-6866
Federal Supply Class:
5310
National Item Identification Number:
012236866
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 1376-81-125 | 44114 | BAE SYSTEMS LAND & ARMAMENTS L.P. | | 5517794 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| COUNTERBORE DIAMETER | 5.05 MILLIMETERS MINIMUM NUT AND 5.5 MILLIMETERS MAXIMUM NUT | | CROSS-SECTIONAL SHAPE | ROUND BOTH ENDS | | FLANGE DIAMETER | 9.879 MILLIMETERS MINIMUM AND 9.969 MILLIMETERS MAXIMUM | | FLANGE THICKNESS | 1.45 MILLIMETERS MINIMUM AND 1.55 MILLIMETERS MAXIMUM | | MATERIAL | STEEL COMP 304 OVERALL | | PROPRIETARY CHARACTERISTICS | PACS | | NOMINAL THREAD SIZE | 5.0 MILLIMETERS | | NUT DIAMETER | 8.023 MILLIMETERS MINIMUM AND 8.032 MILLIMETERS MAXIMUM | | NUT COUNTERBORE DEPTH | 3.0 MILLIMETERS NOMINAL NUT | | NUT LENGTH | 4.35 MILLIMETERS MINIMUM AND 4.55 MILLIMETERS MAXIMUM | | NUT STYLE | SLEEVE | | SPECIAL FEATURES | COUNTERBORE TAPERS OUTSIDE TO ID OF 6.5 MM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD PITCH IN MILLIMETERS | 0.80 | | THREAD TOLERANCE CLASS | 6H INTERNAL | | THREAD SERIES | ISO M |
|
|