|
|
|
National Stock Number:
5310-01-224-1427
Federal Supply Class:
5310
National Item Identification Number:
012241427
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 1276-23-132 | 44114 | BAE SYSTEMS LAND & ARMAMENTS L.P. | | 1276-23-132 | A0199 | FINMECCANICA SPA | | 519893 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 5310PL0829831 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 5519893 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | BLANK RECTANGULAR | | HOLE DIAMETER | 30.5 MILLIMETERS NOMINAL | | MATERIAL | STEEL COMP 1010 OVERALL OR STEEL COMP 1011 OVERALL OR STEEL COMP 1012 OVERALL OR STEEL COMP 1013 OVERALL OR STEEL COMP 1015 OVERALL OR STEEL COMP 1016 OVERALL OR STEEL COMP 1017 OVERALL OR STEEL COMP 1018 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE LEFT CORNER CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | OVERALL DIAMETER | 45.0 MILLIMETERS NOMINAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2 CL 2 FED SPEC 1ST TREATMENT RESPONSE OVERALL OR MIL-C-87115,CL 1 MIL SPEC 2ND TREATMENT RESPONSE OVERALL OR MIL-C-83488,CL 2 TY 2 MIL SPEC 3RD TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL OR ZINC OVERALL OR CHROMATE OVERALL OR ALUMINUM ALLOY OVERALL | | THICKNESS | 5.9 MILLIMETERS MINIMUM AND 6.1 MILLIMETERS MAXIMUM |
|
|