|
|
|
National Stock Number:
5310-01-226-9070
Federal Supply Class:
5310
National Item Identification Number:
012269070
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 13212E4403 | 97403 | CECOM LR CENTER | | CT1-1011 | 03677 | ANTHONY YORK CO |
|
Techincal Specification:
| CROSS-SECTIONAL SHAPE | SQUARE BOTH ENDS | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A36 ASSN STD 9TH MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1524 OR STEEL COMP 1025 OR STEEL COMP 1026 OVERALL | | NOMINAL THREAD SIZE | 0.625 INCHES | | NUT LENGTH | 2.620 INCHES NOMINAL | | NUT WIDTH ACROSS FLATS | 1.500 INCHES NOMINAL | | SPECIAL FEATURES | THRU HOLE LOCATED 0.620 IN. FROM CLOSED END 0.685 IN. MIN AND 0.763 IN. MAX | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-T-704 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PAINT OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 2B | | THREAD LENGTH | 1.000 INCHES MINIMUM | | THREAD SERIES | UNF | | THREAD QUANTITY PER INCH | 18 |
|
|