|
|
|
National Stock Number:
5310-01-228-9053
Federal Supply Class:
5310
National Item Identification Number:
012289053
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 167C2815 | 05606 | GENERAL DYNAMICS-OTS, INC. |
|
Techincal Specification:
| DRIVE POINT QUANTITY | 6 | | FLANGE THICKNESS | 0.105 INCHES MINIMUM AND 0.145 INCHES MAXIMUM | | LUBRICATION | DRY FILM LUBRICANT | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/8,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | ALUMINUM ALLOY 6061 OVERALL | | PROPRIETARY CHARACTERISTICS | PACS | | NOMINAL THREAD SIZE | 0.9375 INCHES | | NUT DIAMETER | 1.870 INCHES NOMINAL | | NUT STYLE | ROUND | | NUT THICKNESS | 1.152 INCHES MINIMUM AND 1.192 INCHES MAXIMUM | | SMALL END DIAMETER | 1.190 INCHES MINIMUM AND 1.210 INCHES MAXIMUM | | SPECIAL FEATURES | SHORTEST END KNURLED | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | 171,7.2.1 MIL STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 20 | | THREAD SERIES | UNEF | | UNDERCUT THICKNESS | 0.530 NOMINAL MILS AND 0.570 NOMINAL CENTIMETERS |
|
|