|
|
|
National Stock Number:
5310-01-230-5197
Federal Supply Class:
5310
National Item Identification Number:
012305197
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 4G33066-101A | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| HOLE DIAMETER | 0.280 INCHES MINIMUM AND 0.287 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000, CONDITION E-2 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.120 INCHES NOMINAL | | MATERIAL | STEEL COMP E4340 OVERALL | | PROPRIETARY CHARACTERISTICS | PACS | | MINIMUM TENSILE STRENGTH | 150000 POUNDS PER SQUARE INCH | | OUTSIDE DIAMETER | 1.250 INCHES NOMINAL | | RECESS ANGLE | 90.0 DEGREES NOMINAL | | RECESS DIAMETER | 0.350 INCHES NOMINAL | | STYLE DESIGNATOR | RECESSED | | SURFACE TREATMENT | PAINT OVERALL |
|
|