5310-01-259-0296, WASHER,FLAT

National Stock Number:
5310-01-259-0296

Federal Supply Class:
5310

National Item Identification Number:
012590296

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

03526 8	K7837	ANIXTER LIMITED
87024A0463	80372	MARINE CORPS
FF-W-92	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
MS51412-6	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

CENTER HOLE SHAPE STYLE	ROUND
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
HARDNESS RATING	34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM
HOLE DIAMETER	0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM
OVERALL DIAMETER	0.868 INCHES MINIMUM AND 0.905 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A108 ASSN STD ALL MATERIAL RESPONSES OVERALL
MATERIAL	STEEL COMP 1008 OR STEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OVERALL
NONDEFINITIVE SPEC/STD DATA	A TYPE AND 1 GRADE AND A CLASS
PERIPHERAL SHAPE STYLE	ROUND
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	ASTM B633,TY 2 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	ZINC AND CHROMATE OVERALL
THICKNESS	0.064 INCHES MINIMUM AND 0.104 INCHES MAXIMUM

Click here to Register for Free 30-day Trial