|
|
|
National Stock Number:
5310-01-274-6092
Federal Supply Class:
5310
National Item Identification Number:
012746092
Description:
WASHER,SHOULDERED
Detail:
A WASHER, ROUND IN SHAPE, AND HAVING A CENTRALLY LOCATED HOLE. ONE BEARING SURFACE IS FLAT AND UNBROKEN, THE OTHER SURFACE IS IN THE FORM OF A RAISED SHOULDER (BOSS) HAVING A FLAT BEARING SURFACE. THE THICKNESS OF THE SHOULDER (BOSS) MUST NOT EXCEED 25 PERCENT OF THE SHOULDER (BOSS) DIAMETER. FOR ITEMS HAVING A SHOULDER (BOSS) OF GREATER THICKNESS, USE BEARING, SLEEVE; BUSHING SLEEVE; OR SPACER, SLEEVE. EXCLUDES INSULATOR, WASHER AND THRUST TYPE WASHERS.
|
Manufacturer Information:
| 9755-6A | 13002 | GOODRICH CORPORATION | | 9755-6A | 6K4C8 | GOODRICH CORPORATION |
|
Techincal Specification:
| HOLE DIAMETER | 3.500 INCHES MINIMUM AND 3.502 INCHES MAXIMUM | | OUTSIDE DIAMETER | 4.190 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4088,T3 ASSN STD SINGLE MATERIAL RESPONSE OR WW-T-700/3,T3 FED SPEC SINGLE MATERIAL RESPONSE OR AMS 4120,T4 ASSN STD SINGLE MATERIAL RESPONSE OR QQ-A-225/6,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | ALUMINUM ALLOY 2024 OVERALL | | MATERIAL THICKNESS | 0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM | | MINIMUM TENSILE STRENGTH | 62000 POUNDS PER SQUARE INCH | | SHOULDER DIAMETER | 3.735 INCHES MINIMUM AND 3.740 INCHES MAXIMUM | | SHOULDER HEIGHT | 0.215 INCHES MINIMUM AND 0.220 INCHES MAXIMUM | | SPECIAL FEATURES | BEVEL ID 7 DEG | | STYLE DESIGNATOR | SHOULDERED | | SURFACE FINISH | 63.0 MICROINCHES ALL SURFACES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL |
|
|