|
|
|
National Stock Number:
5310-01-274-8358
Federal Supply Class:
5310
National Item Identification Number:
012748358
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 5893843 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| BOSS THICKNESS | 0.138 INCHES MINIMUM OVERALL | | BOSS WIDTH ACROSS FLATS | 0.332 INCHES MINIMUM AND 0.344 INCHES MAXIMUM | | COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM AND 100.0 DEGREES MAXIMUM BOTH ENDS | | CROSS-SECTIONAL SHAPE | ROUND FLANGE | | CROSS-SECTIONAL SHAPE | HEXAGONAL BOSS | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4117,T6 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | ALUMINUM ALLOY 6061 OVERALL | | NOMINAL THREAD SIZE | 0.190 INCHES | | NUT DIAMETER | 0.507 INCHES MINIMUM AND 0.513 INCHES MAXIMUM | | NUT LENGTH | 0.182 INCHES NOMINAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY3,CL1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 2B | | THREAD LENGTH | 0.310 INCHES MINIMUM AND 0.330 INCHES MAXIMUM OVERALL | | THREAD SERIES | UNF | | THREAD QUANTITY PER INCH | 32 |
|
|