|
|
|
National Stock Number:
5310-01-275-6826
Federal Supply Class:
5310
National Item Identification Number:
012756826
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 101471-M1 | 1V426 | MUDHOG CORP CENTRAL POWER PRODUCTS DIV | | 16/206-12 | 65525 | EXCELETECH LLC | | 18Z2070D8 | 27315 | MORRIS MATERIAL HANDLING, INC. | | 91572A036 | 39428 | MCMASTER-CARR SUPPLY CO | | 91572A036 | 52256 | GOODYEAR AEROSPACE CORP INDUSTRIAL BRAKE OPNS | | 6139003-15 | 80091 | NAVAL FACILITIES ENGINEERING COMMAND | | 98023A036 | 39428 | MCMASTER-CARR SUPPLY CO | | FF-W-92 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.812 INCHES NOMINAL | | OVERALL DIAMETER | 1.469 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM F436 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM B695 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ZINC OVERALL | | THICKNESS | 0.122 INCHES MINIMUM AND 0.177 INCHES MAXIMUM |
|
|