|
|
|
National Stock Number:
5310-01-276-1659
Federal Supply Class:
5310
National Item Identification Number:
012761659
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 513-5359573 DETAIL 24F | 53711 | NAVAL SEA SYSTEMS COMMAND | | 513-5359573 PIECE 13 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 513-5359573 PIECE 13 | 81316 | PORTSMOUTH NAVAL SHIPYARD |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.410 INCHES NOMINAL | | OVERALL DIAMETER | 1.120 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A108,GRADE 1018 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1018 OVERALL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | PERIPHERAL SHAPE STYLE | ROUND | | SPECIAL FEATURES | MADE FROM NSN 9510-00-287-9403 | | THICKNESS | 0.120 INCHES NOMINAL |
|
|