|
|
|
National Stock Number:
5310-01-277-6236
Federal Supply Class:
5310
National Item Identification Number:
012776236
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 214-040-968-103 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| DRILLED HOLE DIAMETER | 0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM | | DRIVE POINT DEPTH | 0.160 INCHES MINIMUM | | DRIVE POINT QUANTITY | 14 | | DRIVE POINT WIDTH | 0.155 INCHES MINIMUM AND 0.165 INCHES MAXIMUM | | COUNTERSINK ANGLE | 45.0 DEGREES NOMINAL BOTH ENDS | | HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND 36.0 ROCKWELL C MAXIMUM | | HOLE CONFIGURATION STYLE | CONFIGURATION J | | HOLE TYPE AND QUANTITY | 2 DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6415 ASSN STD 1ST MATERIAL RESPONSE OVERALL OR MIL-S-5000,COND C1 MIL SPEC 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4340 OVERALL | | PROPRIETARY CHARACTERISTICS | PACS | | NOMINAL THREAD SIZE | 1.5625 INCHES | | NUT DIAMETER | 2.100 INCHES MINIMUM AND 2.110 INCHES MAXIMUM | | NUT STYLE | ROUND | | NUT THICKNESS | 0.860 INCHES NOMINAL | | SPECIAL FEATURES | BOSS,1.750 IN. OD; GROOVE,0.089 IN. MIN,0.093 IN. MAX W,ID SLOTTED SIDE; 63.0 MICROIN BOSS SEAT; 32.0 MICROIN NUT SEAT; COLOR BLACK | | SURFACE TREATMENT | OXIDE OVERALL | | TEST DATA DOCUMENT | 97499-BPS 4075 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 20 | | THREAD SERIES | UN |
|
|