|
|
|
National Stock Number:
5310-01-278-8226
Federal Supply Class:
5310
National Item Identification Number:
012788226
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 0N371255-1 | 98230 | NATIONAL SECURITY AGENCY |
|
Techincal Specification:
| TEST DATA DOCUMENT | 98230-0N371255 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | THICKNESS | 0.016 INCHES NOMINAL | | CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.125 INCHES NOMINAL | | MATERIAL | STEEL COMP 302 OVERALL | | PERIPHERAL SHAPE STYLE | DEE | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL DIAMETER | 0.214 INCHES NOMINAL | | WIDTH | 0.160 INCHES NOMINAL | | SURFACE TREATMENT | PASSIVATE OVERALL |
|
|