|
|
|
National Stock Number:
5310-01-286-0186
Federal Supply Class:
5310
National Item Identification Number:
012860186
Description:
WASHER,LOCK
Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
|
Manufacturer Information:
| 897356-145 | 3B150 | RAYTHEON COMPANY | | 897356-145 | 49956 | RAYTHEON COMPANY |
|
Techincal Specification:
| MATERIAL | STEEL COMP 301 OR | | STEEL COMP 302 OR | | STEEL COMP 303 OR | | STEEL COMP 303SE OR | | STEEL COMP 304 OR | | STEEL COMP 304L OR | | STEEL COMP 305 OR | | STEEL COMP 308 OR | | STEEL COMP 309 OR | | STEEL COMP 309S OR | | STEEL COMP 310 OR | | STEEL COMP 310S OR | | STEEL COMP 314 OR | | STEEL COMP 316 OR | | STEEL COMP 316L OR | | STEEL COMP 317 OR | | STEEL COMP 321 OR | | STEEL COMP 347 OR | | STEEL COMP 348 OR | | STEEL COMP 385 OR | | STEEL COMP 384 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TYPE II CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 35.0 ROCKWELL C MINIMUM AND | | 43.0 ROCKWELL C MAXIMUM | | STYLE DESIGNATOR | SPLIT HELICAL-RIGHT HAND | | HOLE DIAMETER | 0.636 INCHES MINIMUM AND | | 0.653 INCHES MAXIMUM | | OUTSIDE DIAMETER | 1.079 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.156 INCHES MINIMUM AND | | 0.166 INCHES MAXIMUM |
|