|
|
|
National Stock Number:
5310-01-294-8594
Federal Supply Class:
5310
National Item Identification Number:
012948594
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 26800345 | 27777 | L3 TECHNOLOGIES, INC. | | 26800345 | 51298 | OPTEX SYSTEMS, INC | | 9240-004-46 | 12004 | NAVAL SEA SYSTEMS COMMAND LOGISTICS SUPPORT ENGINEERING ACTIVITY |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 1.265 INCHES MINIMUM AND 1.280 INCHES MAXIMUM | | OVERALL DIAMETER | 2.438 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-750,COMPOSITION A FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | COPPER ALLOY 510 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SPECIAL FEATURES | TWO HOLES DRILLED ON EITHER SIDE OF WASHER,HOLE DIAMETERS .067 TO .069 DRILLED THROUGH; CENTER TO CENTER DISTANCE 2.216 TO 2.220 | | THICKNESS | 0.032 INCHES NOMINAL |
|
|