| COUNTERBORE DIAMETER | 0.224 INCHES MINIMUM AND 0.250 INCHES MAXIMUM BOSS |
| FEATURES PROVIDED | FLOATING NUT |
| LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| LUBRICATION | DRY FILM LUBRICANT |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5085 ASSN STD 2ND MATERIAL RESPONSE NUT |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5085 ASSN STD SINGLE MATERIAL RESPONSE BRACKET |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-23195 MIL SPEC 1ST MATERIAL RESPONSE OR AMS 5639 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5514 ASSN STD 2ND MATERIAL RESPONSE BOSS |
| MATERIAL | STEEL COMP 1050 BRACKET |
| MATERIAL | STEEL COMP 1075 OR STEEL COMP 1050 NUT |
| MATERIAL | STEEL COMP 304 OR STEEL COMP 305 BOSS |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| NUT COUNTERBORE DEPTH | 0.409 INCHES NOMINAL BOSS |
| NUT HEIGHT | 0.704 INCHES NOMINAL |
| NUT STYLE | SPLINE (FLOATING) |
| NUT LENGTH | 0.547 INCHES MINIMUM AND 0.582 INCHES MAXIMUM |
| PILOT LENGTH | 0.409 INCHES NOMINAL |
| PILOT DIAMETER | 0.264 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| SPECIAL FEATURES | BRACKET ONLY HARDNESS ROCKWELL C SCALE 40.0 MIN,50.0 MAX; NUT FLOAT 0.025 IN. MIN MEASURED RADIALLY; PASSIVATED SLEEVE OR BOSS PORTION ONLY,PER FED SPEC QQ-P-35 |
| WIDTH ACROSS FLATS | 0.390 INCHES NOMINAL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC 1ST TREATMENT RESPONSE AND QQ-P-416,TYPE 2,CLASS 2 FED SPEC 2ND TREATMENT RESPONSE BOSS |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC ALL TREATMENT RESPONSES BRACKET |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC ALL TREATMENT RESPONSES NUT |
| SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD CLASS | 3B |
| THREAD SERIES | UNJF |
| THREAD QUANTITY PER INCH | 32 |