|
|
|
National Stock Number:
5310-01-303-5650
Federal Supply Class:
5310
National Item Identification Number:
013035650
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 515-5795279 PIECE 8 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | BLANK RECTANGULAR | | HOLE DIAMETER | 1.765 INCHES MINIMUM AND 1.770 INCHES MAXIMUM | | OUTSIDE LEFT CORNER CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | OVERALL DIAMETER | 2.369 INCHES MINIMUM AND 2.371 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-00465 FED SPEC ALL MATERIAL RESPONSES OVERALL | | MATERIAL | COPPER ALLOY 606 OR COPPER ALLOY 614 OR COPPER ALLOY 630 OR COPPER ALLOY 642 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE FINISH | 63.0 MICROINCHES BOTTOM | | SURFACE FINISH | 63.0 MICROINCHES INNER | | SURFACE FINISH | 63.0 MICROINCHES TOP | | THICKNESS | 0.250 INCHES NOMINAL |
|
|