|
|
|
National Stock Number:
5310-01-303-8164
Federal Supply Class:
5310
National Item Identification Number:
013038164
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 152B2055-1 | 72429 | MISSION SYSTEMS DAVENPORT INC. | | 152B2055-2 | 72429 | MISSION SYSTEMS DAVENPORT INC. | | 152B2055-3 | 72429 | MISSION SYSTEMS DAVENPORT INC. |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.375 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/3,T4 FED SPEC 1ST MATERIAL RESPONSE OVERALL OR QQ-A-225/4,T4 FED SPEC 1ST MATERIAL RESPONSE OVERALL OR QQ-A-250/4,T4 FED SPEC 1ST MATERIAL RESPONSE OVERALL OR QQ-A-367,T6 FED SPEC 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | ALUMINUM ALLOY 2024 OVERALL OR ALUMINUM ALLOY 2014 OVERALL | | III HEAT TREATMENT | T-4 SOLUTION HEAT TREATED, NATURAL AGED | | PERIPHERAL SHAPE STYLE | ROUND | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL DIAMETER | 0.688 INCHES NOMINAL | | THICKNESS | 0.101 INCHES MINIMUM AND 0.105 INCHES MAXIMUM |
|
|