|
|
|
National Stock Number:
5310-01-304-9484
Federal Supply Class:
5310
National Item Identification Number:
013049484
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 140-007-20S22B3 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| BOTTOM RECESS ANGLE | 90.0 DEGREES NOMINAL | | HOLE DIAMETER | 0.312 INCHES MINIMUM AND 0.322 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5604 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.089 INCHES MINIMUM AND 0.099 INCHES MAXIMUM | | MATERIAL | STEEL COMP 630 OVERALL | | STYLE DESIGNATOR | RECESSED BOTH SIDES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | TOP RECESS ANGLE | 90.0 DEGREES NOMINAL |
|
|