|
|
|
National Stock Number:
5310-01-308-8205
Federal Supply Class:
5310
National Item Identification Number:
013088205
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| MS27183-48 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1006 OR | | STEEL COMP 1008 OR | | STEEL COMP 1009 OR | | STEEL COMP 1010 OR | | STEEL COMP 1011 OR | | STEEL COMP 1012 OR | | STEEL COMP 1013 OR | | STEEL COMP 1015 OR | | STEEL COMP 1016 OR | | STEEL COMP 1017 OR | | STEEL COMP 1018 OR | | STEEL COMP 1019 OR | | STEEL COMP 1020 OR | | STEEL COMP 1021 OR | | STEEL COMP 1022 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A109 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.230 INCHES MINIMUM AND | | 0.255 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.923 INCHES MINIMUM AND | | 0.943 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.051 INCHES MINIMUM AND | | 0.080 INCHES MAXIMUM | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 96906 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MS27183-48 |
|
|