|
|
|
National Stock Number:
5310-01-312-8896
Federal Supply Class:
5310
National Item Identification Number:
013128896
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 23-11058-000 | 64678 | DAIMLER TRUCK NORTH AMERICA LLC | | 5613-42-031 | 86928 | SEASTROM MANUFACTURING CO INC | | 5613-42-31 | 86928 | SEASTROM MANUFACTURING CO INC |
|
Techincal Specification:
| MATERIAL | RUBBER CHLOROPRENE CLASS CR OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE J200,2BG 615 A14 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.318 INCHES MINIMUM AND | | 0.338 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.557 INCHES MINIMUM AND | | 0.577 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.031 INCHES NOMINAL | | HARDNESS RATING | 50.0 SHORE DUROMETER A MINIMUM AND | | 70.0 SHORE DUROMETER A MAXIMUM |
|
|